Right Here! This printable PDF will open in a new window.
Pressing [Function] then  will toggle the door chime on and off. Activating this feature will cause any door to beep the keypad sounder when it is opened.
This symbol means that there is some kind of trouble on your system. Press [Function] then  and refer to the chart on pages 12-13 in the User Manual to determine the problem.
Around every 5 years a panel needs a new battery, just like a car. You can come by our office and purchase a battery for under $30, or you can usually find them at local hardware stores for a little higher price.
A "Failure to Communicate" error occurs when the communication path fails. This could be caused by your phones being out, cell towers being worked on, or an equipment failure. If your monitoring is run through your landline phones, you should check if your phone's handset has a dial tone.
This is usually not a persistent problem. When this happens, usually you can just hit [Reset] and the trouble light should go away. However, if it does not you can trip your alarm to the point that your horns go off, and force the alarm system to attempt communication with our central station. If it still does not communicate, or if you have changed your phone system and the system has not worked correctly since then, then you need to contact us immediately.
On page 14 of the User Manual, instructions are given on how to program and erase codes. You cannot change or delete your master
code, but you can add up to 6 additional codes. If you want to give someone a code for one day, just program it in and then erase the code after you return.
DO NOT PUT A CODE INTO USER 8. THIS IS THE DURESS CODE SLOT AND USING THIS CODE WILL CAUSE THE MONITORING STATION TO DISPATCH THE POLICE